Marine & Boating

IP56 is dust-protected and resists powerful water jets (12.5 mm nozzle, 100 kPa). Suited to outdoor equipment subjected to heavy rain or hose-directed water.

IP66 is dust-tight and resists powerful water jets (12.5 mm nozzle, 100 kPa). A robust outdoor rating for equipment exposed to heavy rain, storms, or directed high-pressure hosing (but not high-pressure washdown).

IP67 is dust-tight and withstands temporary immersion in water up to 1 meter for 30 minutes. The go-to rating for outdoor and rugged devices that may be briefly submerged.

IP68 is dust-tight and protects against continuous immersion in water under conditions specified by the manufacturer (typically deeper than 1 meter for prolonged periods). The standard for submersible and marine equipment.

IPX5 resists low-pressure water jets (6.3 mm nozzle, 30 kPa) with solid protection not specified. Used where water-jet resistance matters more than dust sealing.

IPX6 resists powerful water jets (12.5 mm nozzle, 100 kPa) with solid protection not specified. Suitable for heavy-rain or hose-exposed equipment where dust sealing is not required.

IPX8 protects against continuous immersion under manufacturer-specified conditions (depth and duration), with solid protection not specified. The standard for submersible consumer electronics.

IP58 is dust-protected and rated for continuous immersion in water under manufacturer-specified conditions. A niche rating for equipment that must operate submerged while allowing limited dust ingress.

With IP06, an enclosure receives no protection against solid objects and protection against powerful water jets. Water projected in powerful jets by a 12.5 mm nozzle against the enclosure from any direction shall have no harmful effects.. It is an IEC 60529 ingress protection code combining first-digit (solid) level 0 with second-digit (liquid) level 6.

IP07 is an ingress protection code that ensures no protection against solid objects and protection against the effects of temporary immersion in water. Ingress of water in quantities causing harmful effects shall not be possible.. It is an IEC 60529 ingress protection code combining first-digit (solid) level 0 with second-digit (liquid) level 7.

Built to withstand no protection against solid objects and protection against the effects of continuous immersion in water under conditions specified by the manufacturer.. Classified as IEC 60529 ingress protection code IP08, it pairs solid level 0 with liquid level 8.

IP16 is an ingress protection code that ensures protection against solid objects larger than 50 mm and protection against powerful water jets. Water projected in powerful jets by a 12.5 mm nozzle against the enclosure from any direction shall have no harmful effects.. It is an IEC 60529 ingress protection code combining first-digit (solid) level 1 with second-digit (liquid) level 6.

Built to withstand protection against solid objects larger than 50 mm and protection against the effects of temporary immersion in water. Ingress of water in quantities causing harmful effects shall not be possible.. Classified as IEC 60529 ingress protection code IP17, it pairs solid level 1 with liquid level 7.

The IP18 classification guarantees protection against solid objects larger than 50 mm and protection against the effects of continuous immersion in water under conditions specified by the manufacturer.. It is an IEC 60529 ingress protection code combining first-digit (solid) level 1 with second-digit (liquid) level 8.

Built to withstand protection against solid objects larger than 12.5 mm and protection against powerful water jets. Water projected in powerful jets by a 12.5 mm nozzle against the enclosure from any direction shall have no harmful effects.. Classified as IEC 60529 ingress protection code IP26, it pairs solid level 2 with liquid level 6.

The IP27 classification guarantees protection against solid objects larger than 12.5 mm and protection against the effects of temporary immersion in water. Ingress of water in quantities causing harmful effects shall not be possible.. It is an IEC 60529 ingress protection code combining first-digit (solid) level 2 with second-digit (liquid) level 7.

Specified under IEC 60529, IP28 denotes protection against solid objects larger than 12.5 mm and protection against the effects of continuous immersion in water under conditions specified by the manufacturer.. It is an IEC 60529 ingress protection code combining first-digit (solid) level 2 with second-digit (liquid) level 8.

The IP36 classification guarantees protection against solid objects larger than 2.5 mm and protection against powerful water jets. Water projected in powerful jets by a 12.5 mm nozzle against the enclosure from any direction shall have no harmful effects.. It is an IEC 60529 ingress protection code combining first-digit (solid) level 3 with second-digit (liquid) level 6.

Specified under IEC 60529, IP37 denotes protection against solid objects larger than 2.5 mm and protection against the effects of temporary immersion in water. Ingress of water in quantities causing harmful effects shall not be possible.. It is an IEC 60529 ingress protection code combining first-digit (solid) level 3 with second-digit (liquid) level 7.

IP38 provides protection against solid objects larger than 2.5 mm and protection against the effects of continuous immersion in water under conditions specified by the manufacturer.. It is an IEC 60529 ingress protection code combining first-digit (solid) level 3 with second-digit (liquid) level 8.

Specified under IEC 60529, IP46 denotes protection against solid objects larger than 1.0 mm and protection against powerful water jets. Water projected in powerful jets by a 12.5 mm nozzle against the enclosure from any direction shall have no harmful effects.. It is an IEC 60529 ingress protection code combining first-digit (solid) level 4 with second-digit (liquid) level 6.

IP47 provides protection against solid objects larger than 1.0 mm and protection against the effects of temporary immersion in water. Ingress of water in quantities causing harmful effects shall not be possible.. It is an IEC 60529 ingress protection code combining first-digit (solid) level 4 with second-digit (liquid) level 7.

Engineered to deliver protection against solid objects larger than 1.0 mm and protection against the effects of continuous immersion in water under conditions specified by the manufacturer.. Classified as IEC 60529 ingress protection code IP48, it pairs solid level 4 with liquid level 8.